Product Spotlight

OptiCam®: Fibre Optics Connectors and Termination kits

21st July 2017       Data Communication Division

fiber termination kit

THINK OF E.B. HORSMAN & SON FOR

ALL YOUR DATA COMMUNICATION NEEDS

About OptiCam® Termination Tool

The OptiCam® Termination Tool can be used to terminate all Panduit® OptiCam® Pre-Polished Connectors. It simplifies tooling and termination, and virtually eliminates operator error by providing visual indication of proper termination after the cam step has been completed.

About Pre-Polished Fibre Optic Connectors

Pre-polished fiber optic connectors are TIA/EIA-604 FOCIS compliant and contain a factoryterminated fiber, eliminating field polishing and adhesive. Pre-polished fiber optic connectors captivate fiber and buffer in one action allowing for up to two re-terminations with no degradation in performance.

To assist you with your fiber termination, installation instructions and stripping templates for all Panduit® OptiCam® Pre-Polish are included. In addition, E.B. Horsman & Son is happy to provide training if required. Contact your local EBH representative to learn more.

Use Pre-Polished Fibre Optic Connectors for:

  • Fiber optic backbone and horizontal applications
  • Maintenance or emergency restoration of fiber networks
  • Retrofit/initial install in both behind-the-wall (BTW) permanent side of panelized interconnect and cross-connect
  • Remote areas and confined spaces
  • OptiCam® Termination Tool gives installers the flexibility to terminate in very close proximity to the application
opticam pre-polished fiber termination tool

Features & Benefits

Universal Termination

OptiCam® Termination Tool secures both fiber and buffer in one action for all OptiCam™ Connectors with connector specific cradles (included); ensures fast, consistent, and optimal terminations.

Integrated Visual Termination indicator (VTI)

OptiCam® Termination Tool offers visual indication of proper termination after the cam step has been completed; virtually eliminates operator error to deliver a higher yield for a lower installed cost.

Factory Pre-Polished Fiber Stub Endface

NetKey® Opticam Pre-polished Simplex Connectors eliminate inconsistent and timeconsuming field polishing to deliver required optical performance; reduces termination time (less than half the time of field polish connectors) and the number of installation tools required.

Non-Optical Disconnect

NetKey® Opticam Pre-polished Simplex Connectors maintain data transmission under tensile loads for jacketed cable. (Excludes ST connector)

Mechanical Cable Retention

NetKey® Opticam Pre-polished Simplex Connectors consistently provide higher than industry standard cable retention; requires no adhesive, speeding installation.

Dual Cam Design With Fiber And Buffer Clamps

NetKey® Opticam Pre-polished Simplex Connectors secures both the fiber and the buffer during the camming step to facilitate consistent termination results; reduces the termination time compared to conventional termination methods.

Allows up to two re-terminations to achieve optimum termination results; reduces the number of rejected connectors and terminations to provide yield rates approaching 100% for lower installed costs.

Translucent housing assembly

NetKey® Opticam Pre-polished Simplex Connectors facilitates inspection of the fiber termination quality; results in rapid installations, improved termination yields, and lower installed costs.

Book Your Fiber Termination   Training, with E.B. Horsman & Son

Choice of Zirconia Ceramic or Composite Ferrules

NetKey® Opticam Pre-polished Simple Connectors ST and SC connectors provide material option with comparable performance to meet application requirements; zirconia ceramic provides the highest durability for repeated matings.

In terms of the LC connectors, zirconia ceramic ferrules only which provide the highest durability for repeated matings.

OptiCam Fiber Termination Tool

Products & Offerings

OptiCam® Pre-Polished Cam Termination Kit

FCAMKIT

FCAMKIT

  • Case for fiber termination kits

Connector Types and other Termination Kits

We carry different termination kits and connector types that best suit your needs. Please visit our Fiber Termination Buying Guide for more information.



Please contact us for any questions or inquiries on termination tools and training or other data communications services

 Call Us  Email Us

Like This:

Share This:



Components for OptiCam® Pre-Polished Cam Termination Kits

Panduit Case

FKITCASE

  • Case for fiber termination kits
  • For use with data communications test equipment, these accessories help make inline testing easier
Wire Stripper

CST115

  • Fiber cable jacket stripper
  • Plier nose wire stripper
Alcohol Bottle

FALC

  • Alcohol bottle (empty)
  • Plastic bottle has a hands free pump
Buffer Stripper

FBFSP

  • Fiber buffer stripper
  • No adhesive or electricity required for termination
Screwdriver

FSCDVR

  • Screwdriver
  • For use with data communications test equipment, these accessories help make inline testing easier.
Safety glasses

FGLS

  • Safety glasses
  • Multiple product options available
Tweezers

FTWZR

  • Tweezers
  • For use with data communications test equipment, these accessories help make inline testing easier
Water bottle

FWBTL

  • Water bottle (empty)
  • Holds approx. 4 oz of water
Fiber Kevlar shears

FKS

  • Fiber Kevlar shears
  • For use with data communications test equipment, these accessories help make inline testing easier.
Fiber safe workmat

FWRKMAT

  • Fiber safe workmat
Fiber cleaver tool

FJQCVR

  • Fiber cleaver tool
  • Fiber Cable cleaving tool, for use with OptiCam(r) Pre-Polished Cam ConnectorsConnector type LC/ SC/STStandards RoHS
Opticam Termiantion Tool

OCTT

  • OptiCam® Termination Tool; includes batteries, pouch, and two cradles for each OptiCam® Connectors – LC, SC, and ST (patch cords available separately).
  • Holds approx. 4 oz of water
Patch Cord

FVFLPC-2.5SMY

  • Patch cord for all OptiCam® 2.5mm ferrule connectors (SC & ST)
Patch Cord

FVFLPC-1.25SMY

  • Patch cord for all OptiCam® 1.25mm ferrule connectors (LC)

Components for OptiCam® Pre-Polished Cam Termination Kits

Cleaning swabs

FSWB-C

  • Cleaning swabs
  • Each Packet Contains 100 Swabs
clean-up book

FSTY

  • Fiber optic clean-up book,17 pgs/book.
Permanent marking pen

PFX-0

  • Permanent marking pen, fine tip, black ink

Replacement Parts

Replacement blade

FJQCVRB

  • Replacement blade for FJQCVR.
Tool cradles

FSCC

  • Tool cradles for SC OptiCam® Connectors (two per package)
Tool cradles

FLCC

  • Tool cradles for LC OptiCam® Connectors (two per package)
Lint-free wipes

FSTC

  • Tool cradles for ST OptiCam® Connectors (two per package)

You might also like:

Guide to Fiber Optic Termination


Fiber Optic

Considering switching to fiber optics but don't know where to start or don't have the expertise to do it yourself? Our Fiber Termination Buying Guide walks you through it step by step.

Read More

Fiber Optics: The Growing Telecommunications

Division Series

Automation and IIoT have changed the world of industrial plants, but what role do fiber optics play in this change? This Data Communication Division Series explains it all by exploring how industrial plants are changing and the need for fiber optics to adapt to the change.

Read More

Manufacturer Spotlight: Panduit


Panduit

Panduit prides itself on innovation and leadership in the Tech Industry. Since 1955, Panduit has introduced thousands of revolutionary products to meet the rapidly changing needs of their customers.

Read More