Q50BIQ

Banner® Q50 Series LED Measurement Sensor

Signin

FEATURES

Q50BIQ

Sensing Mode (General): Proximity
Sensing Mode (Detailed): Triangulation
Housing Style: Rectangular
Primary Housing Material: Acrylonitrile Butadiene Styrene (ABS)/Polycarbonate
Input/Output: Analog
Indicator Display Type: LEDs
Analog Output: 4-20 mA
Analog Resolution/Discrete Repeatability: 1 mm
Max Sensing Distance: 400 mm
Minimum Sensing Distance: 100 mm
Sensing Beam: Infrared LED
Power Supply: 15 to 30 VDC
Delay at Power-up: 2000 ms
Sensing Beam Wavelength: 880 nm
Adjustments: Teach Button
Temperature Effect: 0.25 mm/deg C from 0 to 50 deg C, 0.35 mm/deg C from -10 to 55 deg C
Connection: Integral QD
QD Type/Cable Length: M12 (Euro) requires mating cordset
Number of Pins: 5 Pin
Vibration: MIL-STD-202F req. Method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06 in, max acc. 10G).
Mechanical Shock: IEC 60947-5-2 Requirements: 30G 11 ms Duration, Half Sine Wave
Analog Current Output Rating: 1 k max @24 VDC, Max Load Resistance = [(Vcc-4.5 V)/0.02 A]
Output Protection: Protected against short circuit conditions
IP Rating: IP67
NEMA Rating: NEMA 6
Max Operating Temperature: 70 deg C (158 deg F)
Min Operating Temperature: -10 deg C (14 deg F)
Max Op. Relative Humidity Non-Condensing (%): 90% @ 50 deg C
Window Material: Acrylic
Warm-up Time: 15 min
Minimum Response Time: 4 ms
Spot Size (@ Reference Distance): 20 mm
Analog Linearity: +/- 3 mm
Minimum Window Size: 10 mm
Colour Sensitivity: 90% White to 18% Gray: < 4 mm; 90% White to 6% Black: < 9 mm (see chart for details)
Remote Teach and Laser Control Input Impedence: 15 k
Max Ambient Light: 10000 lux
Power/Current Consumption (Exclusive of Load): 70 mA
Supply Protection Circuitry: Protected against reverse polarity and transient overvoltages
Feature: Remote Teach: Yes
Feature: Timing (Hold/Delay): No
Feature: Chemical Resistant: No
IO Link: No
RS-232: No
RS-422: No
RS-485: No
SSI: No
Wireless: No Wireless Capability
1-Wire Serial Interface: No
Profibus: No

Add to Cart