- Sensing Mode (General)
- Opposed
- Sensing Mode (Detailed)
- Receiver
- Housing Style
- Rectangular w/ M18 Mount
- Primary Housing Material
- Polybutylene Terephthalate (PBT)
- Input/Output
- Discrete
- Indicator Display Type
- LEDs
- Max Sensing Distance
- 600 mm
- Sensing Beam
- Ultrasonic
- Power Supply
- 12 to 30 VDC
- Delay at Power-up
- 100 ms
- Connection
- Integral QD
- QD Type/Cable Length
- M12 (Euro) requires mating cordset
- Number of Pins
- 4 Pin
- Vibration
- MIL-STD-202F req. Method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06 in, max acc. 10G).
- Mechanical Shock
- IEC 60947-5-2 Requirements: 30G 11 ms Duration, Half Sine Wave
- Mechanical Shock (Additional Comments)
- MIL-STD-202G, Meth. 213B, Conditions H&I (Shock: 75G with Unit Operation: 100G for Non-Operation)
- Output Saturation Voltage NPN Outputs
- < 1.5 V at 10 mA; < 2.0 V at 150 mA
- Output Saturation Voltage PNP Outputs
- < 1.5 V at 10 mA; < 2.0 V at 150 mA
- Max Discrete (Switched) Output
- 100 mA
- Discrete (Switched) Outputs
- NPN Complementary
- Output Protection
- Protected against overload and short circuit conditions. No false pulse upon receiver power-up
- IP Rating
- IP67
- NEMA Rating
- NEMA 6P
- Max Operating Temperature
- 70 deg C (158 deg F)
- Min Operating Temperature
- -40 deg C (-40 deg F)
- Minimum Response Time
- 1 ms
- Rep Rate
- Normal Resolution Mode: 8 ms; High Resolution Mode: 5 ms
- Barrel Diameter
- 18 mm
- Ultrasonic Frequency
- 230 kHz
- Max Off-State Leakage Current
- < 1 A at 30 VDC
- Power/Current Consumption (Exclusive of Load)
- 35 mA
- Supply Protection Circuitry
- Protected against reverse polarity and transient overvoltages
- Feature: Clear Object Detection
- Yes
- Feature: Timing (Hold/Delay)
- No
- Feature: Chemical Resistant
- No
- Application: Ultrasonic
- Yes
- IO Link
- No
- RS-232
- No
- RS-422
- No
- RS-485
- No
- SSI
- No
- Wireless
- No Wireless Capability
- 1-Wire Serial Interface
- No
- Profibus
- No
Customer Service
1.888.467.7626