EC3DT442KU1S
Lutron® EcoSystem® Digital Dimming Ballast, Type K, T4 Triple Tube/CFL Lamp, 42 W Lamp, 43.2/42.9/42.7/42.6 W Wattage, 120/220/240/277 VAC, 0.36/0.2/0.18/0.15 A, 50/60 Hz Frequency, Programmed/Rapid Start, 50 deg F Minimum Starting, Total Harmonic Distortion: <10 %, Power Factor: 0.95, Yes Dimmable, 1 Lamp, Thermal Protection: Class P, 4-Pin Lamp Base, Ballast Factor: 0.95, 167 deg F, Stud Mounting, 4.9 in L x 3 in W x 1 in H Dimensions
Features
- Continuous, flicker free dimming from 100% to 5%
- Continuous, flicker-free dimming from 100 to 5%
- Compatible with EcoSystem® energy saver Node unit, GRAFIK Eye® QS with EcoSystem® unit, PowPak™ dimming module with EcoSystem® unit, and Quantum systems, allowing for integration into an existing⁄planned EcoSystem® lighting control system
- Compatible with EcoSystem® Energi Savr Node™ unit, Grafik Eye® QS with EcoSystem® unit, PowPak™ dimming module with EcoSystem® unit and Quantum® systems, allowing for integration into an existing⁄planned EcoSystem® lighting control system
- Supports standard 3-wire line-voltage phase control technology
- Supports standard 3-wire line voltage phase control technology
- Programmed rapid start design ensures full rated lamp life while dimming and cycling
- Programmed rapid start design ensures full rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing and relay failure
- Ultra-quiet operation
- Ultra quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and⁄or ground
- Protected from miswires of any input power to control lead, or from lamp leads to each other and⁄or ground
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
- End of lamp life protection circuitry ensures safe operation throughout entire lamp life
- Nonvolatile memory restores all ballast settings after power failure
- Non-volatile memory restores all ballast settings after power failure
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem® digital controls
- 100% compatible with all Lutron® 3-wire fluorescent controls and EcoSystem® digital controls
- 100% performance tested at factory
- 100% performance tested at factory
- Ballast is grounded by the specified terminal or by a mounting screw to the fixture
- Ballast mounts using two mounting tabs or studs within a fluorescent fixture
- Within a fluorescent fixture mounting, K case size
- 3040 lumens
- 70.4 lm⁄W system efficacy
- Type
- Type K
- Lamp Type
- T4 Triple Tube, CFL
- Lamp Wattage
- 42 W
- Wattage
- 43.2/42.9/42.7/42.6 W
- Voltage Rating
- 120/220/240/277 VAC
- Amperage Rating
- 0.36/0.2/0.18/0.15 A
- Frequency Rating
- 50/60 Hz
- Start Type
- Programmed/Rapid
- Min Starting Temperature
- 10 deg C (50 deg F)
- Total Harmonic Distortion
- < 10%
- Power Factor
- 0.95
- Dimmable
- Yes
- Number of Lamps
- 1
- Thermal Protection
- Class P
- Lamp Base Type
- 4-Pin
- Ballast Factor
- 0.95
- Enclosure Type
- NEMA 1
- Temperature Range
- 75 deg C (167 deg F)
- Mounting Type
- Stud
- Dimensions
- 4.9 in L x 3 in W x 1 in H
Customer Service
1.888.467.7626