MS-Z101-WH

MS-Z101-WH

Lutron® Maestro® Occupancy Sensing Dimmer, 1-Pole Multi-Location, Series: MS-Z101, 120 to 277 VAC, 8 A, Passive Infrared Sensor, 400 sq-ft Minor, 900 sq-ft Major Coverage, 180 deg Viewing, 10 s Delay, Fluorescent/LED Lamp, 50/60 Hz Response, Hard Wired, Automatic On/Automatic Off/Manual On/Automatic Off Control Output, NEMA WD7, Wall Mount, 32 to 104 deg F, White, 4-11/16 in H x 2-15/16 in W x 1-1/8 in D

Features

• Controls 0-10 V electronic fluorescent ballasts or LED driver load types
• Controls 0 to 10 VDC electronic fluorescent ballasts or LED driver load types
• Passive infrared motion detection with exclusive Lutron® XCT Technology for fine motion detection
• Passive infrared motion detection with exclusive Lutron® XCT™ technology for fine motion detection
• 180 deg sensor field-of-view, up to 30 ft x 30 ft (9 m x 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft x 20 ft (6 m x 6 m) [400 ft2 (36 m2)] minor motion coverage
• Up to 30 x 30 ft (9 x 9 m) [900 sq-ft (81 sq-m)] major motion coverage and 20 x 20 ft (6 x 6 m) [400 sq-ft (36 sq-m)] minor motion coverage
• Occupancy version can be set to auto-on⁄auto-off or manual on⁄auto-off
• Adjustable settings for auto-on light level (occupied level) 100%, 50%, last light level or locked preset light level
• Adjustable timeout (1, 5, 15, or 30 minutes)
• High, medium, low, minimum adjustable sensitivity level
• Adjustable settings for auto-on light level (occupied level) 100%, 50%, last light level, or locked preset light level
• Off warning fades lights to off over a period of 10 s
• Adjustable sensitivity level High, Med, Low, Min
• Adaptive switching algorithm for extended relay life
• Off warning fades lights to off over a period of 10 seconds
• Smart ambient light detection (ALD)
• Advanced Maestro® dimmer features available (locked preset, fade-to-on, and fade-to-off, etc)
• High end trim and low end trim to adjust maximum and minimum light levels
• Adaptive switching algorithm for extended relay life
• Selectable dimming curve linear or square law
• Smart ambient light detection (ALD)
• Works with a single standard mechanical 3 way switch or up to 9 companion switches (MA-AS or MSC-AS)
• High-end trim and low end trim to adjust maximum and minimum light levels
• Controls up to 25 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast⁄driver to limit the current draw to 2.0 mA maximum)
• Selectable dimming curve- linear or square law
• Miswire and incompatible load alert
• On a single-tap, lights fade ON or OFF, on a double-tap, lights go to full ON
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached