QT50ULB-CRFV

Banner® QT50U Series 8 m Range Chemical Resistant Ultrasonic Sensor

UPC: 66248874833

FEATURES

QT50ULB-CRFV

Chemical Resistant Series: Proximity Mode. Range: 200 mm - 6 mm; Input: 13-30 V dc. Outputs: Analog: 0-10 V or 4-20 mA. 2 m (6.5 ft) Cable

Sensing Mode (General): Proximity
Sensing Mode (Detailed): Time of Flight
Housing Style: Rectangular
Primary Housing Material: Polybutylene Terephthalate (PBT)
Input/Output: Analog
Indicator Display Type: LEDs
Analog Output: 0-10 VDC or 4-20 mA
Analog Resolution/Discrete Repeatability: 1 mm
Max Sensing Distance: 6000 mm
Minimum Sensing Distance: 200 mm
Sensing Beam: Ultrasonic
Power Supply: 13 to 30 VDC
Delay at Power-up: 1500 ms
Adjustments: Push Button(s)
Temperature Effect: Uncompensated: 0.2% of distance/deg C, Compensated: 0.02% of distance/deg C
Connection: Cable
QD Type/Cable Length: 2 m
Number of Pins: 5 Pin
Vibration: MIL-STD-202F req. Method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06 in, max acc. 10G).
Mechanical Shock: IEC 60947-5-2 Requirements: 30G 11 ms Duration, Half Sine Wave
Analog Current Output Rating: 1 k or [(Vcc-5 V)/0.02 A], whichever is lower
Analog Voltage Output Rating: 500 Min. Load Impedance
Output Protection: Protected against short circuit conditions
IP Rating: IP67
NEMA Rating: NEMA 6P
Storage Temperature: -40 to 90 deg C (-40 to 194 deg F)
Max Operating Temperature: 50 deg C (122 deg F)
Min Operating Temperature: -20 deg C (-4 deg F)
Max Op. Relative Humidity Non-Condensing (%): 100%
Warm-up Time: 15 min
Temperature Warm-up Drift upon Power-up: < 7% of the sensing distance upon power-up
Temp. Warm-up Drift (Notes 1): After 5 min, the apparent switchpoint is < 0.6% of the actual position.
Temp. Warm-up Drift (Notes 2): After 25 min, the sensing position will be stable.
Minimum Response Time: 100 ms
Rep Rate: 96 ms
Analog Linearity: +/- 0.2% of span from 200 to 8000 mm; +/- 0.1 % of span from 500 to 8000 mm (1 mm minimum)
Barrel Diameter: 56 mm
Minimum Window Size: 20 mm
Ultrasonic Frequency: 75 kHz
Power/Current Consumption (Exclusive of Load): 100 mA max @ 10 VDC; 40 mA max @ 30 VDC
Supply Protection Circuitry: Protected against reverse polarity and transient overvoltages
Feature: Remote Teach: Yes
Feature: Clear Object Detection: Yes
Feature: Timing (Hold/Delay): No
Feature: Chemical Resistant: Yes
Application: Ultrasonic: Yes
IO Link: No
RS-232: No
RS-422: No
RS-485: No
SSI: No
Wireless: No Wireless Capability
1-Wire Serial Interface: No
Profibus: No

Add to Cart