EC3DT4MWKU1
Lutron® EcoSystem® Digital Dimming Ballast, Type K, T4 Quad/CFL/Triple Tube Lamp, 26/32 W Lamp, 26.4/26.8/26.9/27/34.8/33/33.6/33.2 W Wattage, 120/220/240/277 VAC, 0.22/0.12/0.11/0.1/0.29/0.15/0.14/0.12 A, 50/60 Hz Frequency, Programmed/Rapid Start, 50 deg F Minimum Starting, Total Harmonic Distortion: <10 %, Power Factor: 0.95, Yes Dimmable, 1 Lamp, Thermal Protection: Class P, 4-Pin Lamp Base, Ballast Factor: 0.95, 167 deg F, Tab Mounting, 4.9 in L x 3 in W x 1 in H Dimensions
Features
- Continuous, flicker-free dimming from 100 to 5%
- Continuous, flicker free dimming from 100% to 5%
- Compatible with EcoSystem® Energi Savr Node™ unit, Grafik Eye® QS with EcoSystem® unit, PowPak™ dimming module with EcoSystem® unit and Quantum® systems, allowing for integration into an existing⁄planned EcoSystem® lighting control system
- Compatible with energy Savr Node™ with EcoSystem® devices, GRAFIK Eye® QS with EcoSystem® connection, PowPak™ dimming module with EcoSystem® connection and Quantum® systems, allowing for integration into an existing⁄planned EcoSystem® lighting control system
- Supports standard 3-wire line voltage phase control technology
- Supports standard 3-wire line voltage phase control technology
- Programmed rapid start design ensures full rated lamp life while dimming and cycling
- Programmed rapid start design ensures full rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing and relay failure
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing and relay failure
- Ultra quiet operation
- Ultra-quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and⁄or ground
- Protected from miswires of any input power to control lead or from lamp leads to each other and⁄or ground
- End of lamp life protection circuitry ensures safe operation throughout entire lamp life
- End of lamp life protection circuitry ensures safe operation throughout entire lamp life
- Non-volatile memory restores all ballast settings after power failure
- Non-volatile memory restores all ballast settings after power failure
- 100% compatible with all Lutron® 3-wire fluorescent controls and EcoSystem® digital controls
- 100% compatible with all Lutron® 3-wire fluorescent controls and EcoSystem® digital controls
- 100% performance tested at factory
- 100% performance tested at factory
- For T4 4-pin quad tube⁄triple tube
- Type
- Non-Studded
- Series
- EC3DT
- Lamp Type
- T4 Quad, CFL, Triple Tube
- Lamp Wattage
- 26 W
- Wattage
- 26.4/26.8/26.9/27 W
- Voltage Rating
- 120/220/240/277 VAC
- Amperage Rating
- 0.22/0.12/0.11/0.1 A
- Frequency Rating
- 50/60 Hz
- Start Type
- Programmed/Rapid
- Min Starting Temperature
- 10 deg C (50 deg F)
- Total Harmonic Distortion
- < 10%
- Power Factor
- 0.95
- Dimmable
- Yes
- Number of Lamps
- 1
- Thermal Protection
- Class P
- Lamp Base Type
- 4-Pin
- Ballast Factor
- 0.95
- Enclosure Type
- NEMA 1
- Temperature Range
- 75 deg C (167 deg F)
- Mounting Type
- Tabs/Stud
- Dimensions
- 4.9 in L x 3 in W x 1 in H
Customer Service
1.888.467.7626