QT50UVR3F

Banner® QT50U Series 8 m Range Chemical Resistant Ultrasonic Sensor


QT50UVR3F

Sensing Mode (General)
Proximity
Sensing Mode (Detailed)
Time of Flight
Housing Style
Rectangular
Primary Housing Material
PBT
Input/Output
E/M Relay
Indicator
LED(s)
Analog Resolution/Discrete Repeatability
1
Max Sensing Distance (mm)
8000
Minimum Sensing Distance (mm)
200
Sensing Beam
Ultrasonic
Power Supply
85-264 V ac / 48-250 V dc
Delay at Power-up (ms)
1500
Adjustments
Push Button (s)
Temperature Effect (mm/°C)
Uncompensated: 0.2% of distance/°C; Compensated: 0.02% of distance/°C
Connection
Cable
QD Type/Cable Length
2 m
Number of Pins
5
Vibration
MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Max Discrete (Switched) Output (mA)
8000
Discrete (Switched) Outputs
SPDT e/m Relay
Output Protection
Protected against short circuit conditions
IP Rating
IP67
NEMA Rating
NEMA 6P
Storage Temperature (°C)
-40 to 90
Max Operating Temperature (°C)
70
Min Operating Temperature (°C)
-20
Max Op. Relative Humidity Non-Condensing (%)
100
Warm-up Time (minutes)
30
Temperature Warm-up Drift upon Power-up
< 7% of the sensing distance upon power-up.
Temp. Warm-up Drift (Notes 1)
After 5 min, the apparent switchpoint is < 0.6% of the actual position.
Temp. Warm-up Drift (Notes 2)
After 25 min, the sensing position will be stable.
Minimum Response Time (ms)
100
Rep Rate (ms)
96
Minimum Window Size (mm)
20
Ultrasonic Frequency (kHz)
75
Power/Current Consumption (exclusive of load)
1.5 W max
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Feature: Remote Teach
Yes
Feature: Clear Object Detection
Yes
Feature: Timing (Hold/Delay)
No
Feature: Chemical Resistant
No
Feature: Pump-in/ Pump-out
Yes
Application: Ultrasonic
Yes
IO Link
No
RS-232
No
RS-422
No
RS-485
No
SSI
No
Wireless
No
1-wire Serial Interface
No
Profibus
No
Add to Cart